3 Layers Filters SMT Wave Soldering Fume Extractor Pot Coating

SMT Wave Soldering Oven Reflow Soldering Oven Soldering Pot Coating Machine Fume Extractor

Specifications:

The 1^st Layer fire prevention mesh for repeated use (need regular cleaning)

The 2nd Layer Square Bellows Pocket suggest replacement period: 2-4 months

The 3nd Layer Integral sheet metal filter suggest replacement period: 6-8 months

We own several brands: New Oxygen, Fume Go, Qubo, etc.

We make really effective fume extractors only. Our superiority in technology and high quality has gained the leading position in the air purifying industy. The filtering efficiency of our fume extractors has reached the highest standard in the world.

Description:

• Filtering System: Design with fire prevention filtering system.
• Construction feature: Adopt upward air inlet,and upward air outlet.In order to facilitate the heat dissipation function, u-shaped air duct is adopted for heat dissipation design. The internal velocity of the air duct is conducive to the settlement of large particles.The fire mouth sealing plate can be removed to clean the settling particles.
• Motor choose the first-line brand vertical motor, the motor and aluminum shaft connected;Low noise and vibration rate, using volute design to increase flow and negative pressure effect.
• Air inlet feature: Double air intakes can be selected according to the working condition: one spare, one connecting pipe, and the installation size of fire outlet sealing plate on the lower right side is the same as the installation size of air inlet.
• Lower right fire extinguisher mouth: In case of fire inside the equipment, do not open the front door plate. Open the fire extinguisher and point to the nozzle of the fire extinguisher at the fire extinguisher to extinguish the fire source, so as to avoid more serious safety accidents caused by pressure shock wave generated by opening the front panel.
• Main Power supply line: The control board is equipped with an emergency stop master switch.In case of equipment danger, disconnect the main power supply and stop the operation of the equipment.
• Printing control panel more beautiful, printing color corrosion resistance, not easy to peel off the paint surface.

Applications:

Waterun Technology Co.,Ltd manufacturing a variety of high quality air purification systems for filter the harmful substances. Our line of floor, bench top, mounted and portable units serve a variety of applications including welding, soldering, manufacturing, laboratory and pharmaceutical operations.Don’t despair if you don’t see your application listed below! Our modular product line can be configured in a number of different ways to address your specific requirements.Contact us today to find out the solutions!

Competitive Advantage:

Our company uses a brushless motor, compare with the ordinary motor, this motor speed is higher, lower noise, it does not require maintenance, but longer product life span. Self-developed impeller, better quality than ordinary plastic impeller, more stable, more powerful suction. The unique tiered filter design, can effectively purify the toxic and harmful substances in the air, such as formaldehyde, benzene, ammonia, radon gas, sulfur dioxide..etc, and use of low cost.

Compared with the products from foreign countries, our products in terms of the effect is almost the same, but the majority of our products are less than USD2000, so our products are cost-effective, and the use of more affordable cost. The products from abroad mainly purify the viruses and bacteria as the main direction of governance. In China not only to purify viruses, bacteria, but also clean harmful smoke pollution. WHO estimates that there are over 200 million people deaths each year due to inhalation of indoor and outdoor air pollution in small particles.

FAQ:

1. What’s the functions for the filters?
Answers. 1) Pre-Filter/F8 pre-filter: the large-size pad filter can filter large particles of dust (according the requirement to select pre-filter or F8)
2) PP Middle Filter/Fiber glass filter: it filters the middle-size, small size particles bigger powders for prolonging the main filter's life. (according the requirement to select PP middle filter or fiber glass filter,can use both, the efficiency better.)
3) Main Filter/Active carbon: it cleans harmful particles and fumes.
4) High efficiency filter(combine middle filter and active carbon filter): it can filter about 0.3micron particles and other harmful fumes.

2. What’s the advantage compare with ducted exhaust fan?
Answer: 1. Many advantages like (1) Clean the air quality (2) energy saving (3) easy installation, flexible remove (4) low cost (5) reduce the incidence of diseases and major diseases, and health is priceless (6) to reduce unpleasant smell (7) to reduce dust and other harmful substances, and so on.

3. What’s the life span of our fume extractor?
Answer: Motor lifetime is (continuous working 24 hours) 20,000 hours, consider environmental factors. Usually it can use 4-5 years without any problems.

4. The ducts for the fume extractor can be shortened or lengthened?
Answer: It can be shortened or lengthened appropriate; but we suggest not more than 1.5meter. For multi-station, the total pipe length should not exceed 10 meters.

5. What’s the best distance between the nozzle and the smokes?
Answer: The distance to be 5-15cm is the best.

6. How long need to to replace the pre-filter, middle filter and the main filter?
Answer: 1. Pre-filter : normally needs to replace by 1 months
2. Middle filter: normally needs to replace by 3 months
3. Main filter: normally needs to replace by 6 months.

7. Bent pipe will affect smoke purify?
Answer: Yes, it affect the suction power, it should reduce the bent rate.

8. Can our fume extractor completely filtered poison gas?
Answer: No, there still no any kind of filter can filter out 100% of poison gas, but you can make a different filter net rate upon request.